A truck's power doesn't always make it to the road. When the rear axle is allowed to rotate, wheel hop and loss of traction can occur. Get that lost power to the ground with a BD Traction Bar Kit! BD traction bars are engineered to precisely follow the OEM spring travel sweep and axle rotation. This minimizes ride stiffness, and ensures no adjustment is needed when pulling or hauling! Bolt on and built to last, with 2-inch OD tube and the highest quality QA1 heavy duty American-made rod ends rated for 28,000lbs each! Polyurethane bushings provide direct loading without excessive movement, unlike spring loaded designs. Whether you're towing, running a lift kit, bigger tires, high horsepower, competitive pulling or drag racing - make sure to stay in control of that suspension with a BD Traction Bar Kit.. 2- in. OD tube with QA1 3/4- in. heavy duty American 28,000 lbs rod ends. Prevents wheel hop, axle wrap and large angles on U-joints. No adjustment is needed when pulling or hauling. Designed for trucks ranging from a 6- in. lift all the way to a 2- in. drop. Polyurethane bushings provide direct loading without excessive movement unlike spring loaded designs. Optimized to arc in the same path the axle travels during suspension movement which makes for a smooth ride and the ability to tow without having to adjust the bars. All necessary hardware and Rivet-nut specific drill bit and tool included. 54- in. eye-to-eye length.. Optimized to arc in the same path the axle travels during suspension movement which makes for a smooth ride and the ability to tow without having to adjust the bars. Track Bar Kit; Incl. Drivers And Pass. Side Track Bars/Threaded Connectors/Bushings/All Necessary Hardware;. Polyurethane bushings provide direct loading without excessive movement unlike spring loaded designs. New Billet ProForce Torque Converter which prevents notorious converter failure. New Cast Aluminum Transmission Oil Pan with an extra 2 quarts of fluid capacity. Designed for trucks ranging from a 6-inch lift all the way to a 2-inch drop. Machined bellhousing and pump surface to eliminate wear and pressure loss. All necessary hardware and Rivet-nut specific drill bit and tool included. BD Diesel Track Bar Kit - Dodge 2003-2017 2500/3500 w/o OEM Rear Airbags. New Clutch Select and TCC Regulator valve to eliminate sticky valves. BD Dodge Traction Bars Kit 2003-2018 2500/3500 w/o OEM Rear Airbags. Updated GM Forward Piston to prevent cracks; common on OEM piston. 2-inch OD tube with QA1 3/4-inch heavy duty American rod ends. Prevents wheel hop, axle wrap and large angles on U-joints. New Pressure Regulator valve to prevent low line pressure. No adjustment is needed when pulling or hauling. New TEHCM pressure switch seals and discs. TRACTION BARS DODGE 2500/3500. Cleaned and tested TEHCM unit. New OEM clutches and steels. 54-inch eye-to-eye length. Suspension Traction Bar. No welding required. New Molded Pistons. TRACTION BARS. Track Bar Kit

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov