The ICON Centerline Steering Stabilizer features a through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers, resulting in more consistent damping and symmetrical steering feel throughout the input range. The large 2.5-inch diameter stabilizer body and piggyback reservoir increases fluid volume to prevent performance fade due to heat and cavitation. This unit provides a significant increase in steering damping compared to the stock equipment, for an improved driving experience with both stock size and oversize aftermarket wheels and tires. The kit also allows for increased steering travel compared to other aftermarket steering stabilizers. The stabilizer body shares components with ICON's proven 2.5 Series shock absorbers, meaning the unit is fully rebuildable. 2.5 Series features a 6061 hard anodized aluminum shock body for excellent corrosion resistance and a beefy 7/8” chrome plated induction-hardened steel shaft. FK Rod End bearings provide precise function & feel throughout steering range. Installation is 100% bolt-on using common hand tools and should be an easy job for both professional mechanics and experienced DIY'ers.. TECH NOTE: Use ICON 1” front bump stop spacers, part # 61112 (included with kit), unless the suspension system that you are using calls for larger bump stop spacers. If using a non-ICON configuration, cycle the suspension to verify that the stabilizer does not make contact upon full compression.. Features a 2.5 Series shock with through-shaft design to eliminate the push/pull sensation associated with traditional steering stabilizers. This unit provides a significant increase in steering damping compared to the stock equipment.. TECH NOTE: Not compatible with 2008-2010 or 2015-2016 F-350 Dually equipped with Wide Track front axle. For Wide Track Axle equipped trucks, consider part number 65054.. TECH NOTE: After installation, cycle steering left and right to ensure full range of steering is achievable and stabilizer is installed correctly. TECH NOTE: Mounts over stock front differential cover, not compatible with most aftermarket covers.. TECH NOTE: Not compatible with F-450/F-550. For F-450/F-550 fitment, consider part number 65054.. Through shaft design eliminates the push/pull sensation associated with traditional stabilizers. 6061 hard anodized aluminum shock body provides excellent corrosion resistance. 5WT shock oil for consistent suspension damping along a wide temperature range. Offers increased wheel travel compared to ICON's dual steering stabilizer kit. FK Rod End bearings for precise function & feel throughout steering range. ICON 05-22 Ford Super Duty 2.5 Power Brake Steering Stabilizing Kit. Provides symmetrical steering feel throughout input range. Fully rebuildable ICON Vehicle Dynamics 2.5 Series shock. Drastically increased steering damping over stock unit. TECH NOTE: Not compatible with aftermarket tie rods. 7/8” chrome plated induction-hardened steel shaft. 05-22 FSD 2.5 PB CENTERLINE STABILIZER KIT. Piggyback reservoir design. 100% bolt-on installation. STEERING STABILIZER. Steering Damper Kit. 65052

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov