Roto-molded Intake Tube: The EVO2001 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. The intake tube also includes our patented tuning process that funnels air at a precise rate past the MAF sensor. This patented tuning process ensures accurate fuel trims and aggressive power gains without the fear of check engine lights. SuperNano-Web Dry Air Filter: "That's massive!"is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO2001 cold air intake system. Using the largest filter possible for this application has increased the available air volume - resulting in added power while keeping the installation process quick and simple. , , Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and reliable fit. , , Hassle-Free Installation: Make it easy! By designing this kit in a 3D workspace, you're ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood. Dyno Proven: Plain and simple, NUMBERS talk! Injen has a strong legacy of designing and thoroughly testing every product we develop and the EVO2001 clearly benefits from our dedication to performance. Our engineers put in countless hours of testing to prove that we have developed the safest, highest performing kit on the market. With 15 additional horsepower and 11 Ft.-lbs. of torque, Injen is proud to say that the EVO2001 Evolution Cold Air Intake system is the very best intake system for your Nissan/Infiniti that money can buy.. Activate the hidden performance of your BR-Z/FR-S/GT86 with Injen's EVO2001 Evolution sealed cold air intake system. The EVO2001 was designed specifically for the 2013-2020 Subaru BR-Z, 2013-2016 Scion FR-S, and the 2017-2020 Toyota GT86 ? all equipped with the stout 2.0L engine. Every EVO2001 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!, , The EVO2001 Cold Air Intake system features our 2-piece box design that incorporates our boost plenum, our fully integrated ram air scoop, a massive 360? SuperNano-Web dry air filter, and a built-in Filter Monitor for quick and easy filter inspections. Every Injen Evolution air induction system utilizes Injen's proprietary SuperNano-Web dry air filters. Don't just take our word for it, every intake system that Injen Technology produces is 100% dyno tested in-house and those results are published for anyone to see. , , Roto-molded Housing and Ram Air Scoop; The EVO2001 system features our 2-piece box design that incorporates our boost plenum. The box is molded into our fully functional ram air scoop to capture the maximum amount of cool air to feed that hungry turbo. , ,. Activate the hidden performance of your BR-Z/FR-S/GT86 with Injen's EVO2001 Evolution sealed cold air intake system. The EVO2001 was designed specifically for the 2013-2020 Subaru BR-Z, 2013-2016 Scion FR-S, and the 2017-2020 Toyota GT86 – all equipped with the stout 2.0L engine. Every EVO2001 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!. This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.. Evolution Series Air Induction System; Incl. Roto-Molded Housing-Ram Air Scoop And Intake Tube/SuperNano-Web Dry Filter/Hardware; HP Gains +15 HP/Torque Gains +11 ft./lbs. ;. EVOLUTION Cold Air Intake System, Part No. EVO2001, 2013-2020 Subaru BR-Z H4-2.0L, 2013-2016 Scion FR-S H4-2.0L, 2017-2020 Toyota GT86 H4-2.0L.. Intake scoop is designed to capture the largest amount of cool air. Aggressive underHood appearance while maintaining an OE fit. Optional Rain Guard sold separately part number EVO2000RG. Dyno Proven gains of up to 15 hp and 11 lb-ft. of torque. Stainless steel band clamps with inner protective liner. Injen 13-20 Toyota 86/Subaru BRZ 2.0L Evolution Intake. Optional Rain Guard sold separately part # EVO2000RG. Fully serviceable Injen SuperNano-Web dry air filter. Durable Roto-Molded Polyethylene Construction. Reinforced automotive grade silicone couplers. Replacement air filter part number X-1131-BB. Designed to work with the stock calibration. Stainless Steel Hardware/Clamps And Screws. Aggressive intake growl under acceleration. Injen Technology Limited Lifetime Warranty. Evolution Series Air Induction System. EVOLUTION Cold Air Intake System. Made in Pomona, California USA. Engine Cold Air Intake. Injen Evolution Intake. Evolution Intake. Air Intake Kit

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov