Ford F350 Suspension Lift Kit - Fabtech - Rad Arm Sys w/4.0 R/R & 2.25 & Rear Lift Springs - `11-`16

Ford F350 Suspension Lift Kit - Fabtech - Rad Arm Sys w/4.0 R/R & 2.25 & Rear Lift Springs - `11-`16

Ford F350 Suspension Lift Kit - Fabtech - Rad Arm Sys w/4.0 R/R & 2.25 & Rear Lift Springs - `11-`16
Ford F350 Suspension Lift Kit - Fabtech - Rad Arm Sys w/4.0 R/R & 2.25 & Rear Lift Springs - `11-`16
Ford F350 Suspension Lift Kit - Fabtech - Rad Arm Sys w/4.0 R/R & 2.25 & Rear Lift Springs - `11-`16
Product Information
 price
$6,350.55
$7,620.66 Save: $1,270.11

Lowest Price Guaranteed
Average Rating
Brand:
Model:
Ford F350

Available Options

Drive now, Pay later with Affirm
or with PayPal

Both options will be available upon checkout.

Fabtech?s Radius Arm system for the Ford Super Duty is built to handle the on and offroad demands of the truck enthusiast. This system is a complete upgrade to the factory suspension and will provide additional strength for use with oversized tires. The heart of this quality system is Fabtech?s tubular Radius Arms. The design of these arms comes from Fabtech race components built with a tubular structure reinforced by a dimple die side plate and heavy gusseting for rugged offroad use. They are a superior upgrade to the stock stamped arms. Included in this system is the massive Dirt Logic 4.0 Coilover Conversion for outstanding damping capacity offroad with a quality on road ride. The Coilover bolts in place of the factory coil spring without removal of the coil spring bucket. The giant 4? diameter aluminum remote reservoir mounts horizontally above the Coilover to allow for full compression travel with oversized tires. The Dirt Logic 4.0 Coilover is the biggest and baddest on the market for the Ford Super Duty. High quality components with properly designed suspension geometry is what sets this system apart from all other Radius Arm suspensions. System includes a free 5 year 60,000 mile powertrain warranty. Each Fabtech component has been designed with specific features and benefits that create this quality suspension system.. TIRE SIZE - 355/65R18 WHEEL - 18X9.5 W/4 3/4" BS W/MINOR TRIMMING; TIRE SIZE - 37/13.50R20 WHEEL - 20X10 W/4 1/2" BS W/MINOR TRIMMING; 3. NON DUALLY MODELS ONLY.; 27. FRONT DRIVE SHAFT MODIFICATION MAY BE REQUIRED TO CLEAR EXHAUST ON GAS MOTOR.; 29. REAR SPRINGS MAY REDUCE LOAD CARRYING CAPACITY. ; 170. VEHICLE MAY NOT SIT LEVEL DUE TO FACTORY REAR OPTIONS. Our patented Radius Arms feature a full tubular structure strengthened by dimple die side plates, with an adjustable alignment cam at the axle to allow caster adjustment. Front spring lift options includes 6 replacement Coil Springs. Completing this system is a Trac Bar relocation bracket, Pitman Arm, Sway Bar drops, and a rear Block & U-bolt kit.. Fabtech 11-16 Ford F250/350 4WD 8in Radius Arm System w/DL 4.0 Resi Coilovers & Rear DL 2.25 Shocks. 8" RAD ARM SYS W/ 4.0 R/R & 2.25 & RR LF SPRNGS 2011-16 FORD F250/350 4WD. 8in. RAD ARM SYS W/4.0 R/R/2.25/RR LF SPRNGS 2011-16 FORD F250/350 4WD. Radius Arm Lift System. 8" RAD ARM SYS W/ 4.. Suspension Lift Kit. LftKt-Suspw/Shock
Disclaimer: Some images in our product listings that are provided by the manufacturer/ supplier are for illustration purposes only and may not be an exact representation of the item. The product listing details are accurate for the item offered. Please refer to the product description for precise specification and as always do not be hesitant to reach out to us with any questions.



CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

About Manufacturer

Located in Chino, California our headquarters spans across five acres. The custom building was constructed to Fabtech's specification for in house development, manufacturing, distribution and administration. The 100,000 square foot facility is divided into designated departments that can operate as a single unit or collectively as a group. This allows Fabtech to function 24 hours a day as needed without compromising security, capacity or quality of the operations.

Fabtech's development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market.

Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.

New vehicle platforms now require a full integration of the vehicles electronics and sensors into the suspension design in order for the vehicle to properly function. Fabtech has invested into proprietary development processes and technologies to aid in properly designing new vehicle suspension systems that lead the industry.

In-field testing and multiple vehicle fit checks ensure products will fit properly during installation and provide years of trouble free service with superior vehicle ride qualities.

To ensure product quality, Fabtech builds all of its componentry in house. The manufacturing division is a world class lean environment dedicated to consistently producing quality parts in low or high volume production runs. Multiple laser cutters, robotic welders, forming equipment, machining centers and skilled welders provide flexibility and quality to its production.

Packaging, warehousing and distribution are contained within the building for immediate shipment world wide. Our Administrative staff provides support to the many divisions that make up the company while our knowledgeable Sales staff assists our valued customers.

Product Reviews

Average user rating

0 / 5

0 reviews

5
4
3
2
1

Two locations to serve you

AUSTIN, TX

22108 SH 71 W.
Spicewood, TX 78669
512-982-9393
Mon-Fri: 9 AM - 6PM CST
Sat-Sun: Closed

LOS ANGELES, CA

2716 Dawson Ave.
Signal Hill, CA 90755
562-981-6800
Mon-Fri: 9 AM - 6PM PST
Sat-Sun: Closed