ICON's 2.5 VS Series Remote Reservoir Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to 2005-2023 F-250 and F-350 pickup trucks. The advantage of utilizing a coilover conversion kit is that they have been designed to increase the overall damping ability of the vehicle while at the same time allowing for user-defined ride height adjustment. The 2.5" Remote Reservoir Coilover featured in these kits is based off of ICON’s 2.5 VS Series shock line - meaning that features like ICON engineered coil springs, FK Rod End bearings, and vehicle-specific valving come standard. Quality machined components and a fully serviceable design make for a product that will stand the test of time, yet retain the ability to be rebuilt or re-valved as necessary.. ICON's 2.5 VS Series Remote Reservoir Bolt-In Coilover Conversion Kit will add a new level of performance and adjustability to 2005-UP F-250 and F-350 trucks. The advantage of utilizing a coilover conversion kit is that they have been designed to increase the overall damping ability of the vehicle while at the same time allowing for user-defined ride height adjustment. The 2.5" Remote Reservoir Coilover featured in these kits is based off of ICON’s 2.5 VS Series shock line - meaning that features like Eibach coil springs, FK Rod End bearings, and vehicle-specific valving come standard. Quality machined components and a fully serviceable design make for a product that will stand the test of time, yet retain the ability to be rebuilt or revalved as necessary.. TECH NOTE: Due to tight clearances and varying placement of vehicle’s wiring harness in the upper front-passenger wheel well area, installer must ensure adequate clearance between the harness, coilover reservoir, and other components to prevent chafing/damage to wire harness. If adequate clearance cannot be achieved, please contact ICON Customer Service.. TECH NOTE: 2005-2016 F-250s require 4” rear blocks with 15” U-bolt kit to sit level with 2.5” lifted front. ICON block kit part # 194275 and U-bolt kit part # 37003 (2005-2010 models) or part # 67003 (2011-2016 models) are recommended.. ICON's 2.5 Series Remote Reservoir Bolt-In Coilover Kit will add a new level of performance and adjustability to the 05-23 Ford Super Duty. Increasing the overall damping ability while allowing for user-defined ride height adjustment.. TECH NOTE: Brake line kit (Part # 61111) is optional for end users with 2017-2023 models who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install). TECH NOTE: 2020-UP Super Duty models have a lower ride height from the factory than 2017-2019 trucks. This results in an increase of approximately .75" of additional lift height over ICON's advertised numbers.. TECH NOTE: If installing with ICON 2.5 Series remote reservoir secondary shocks, reservoir doubler kit part number 611003 is also required. TECH NOTE: 2020-2022 Super Duty diesel models equipped with Tremor package will have front lift height range of 2.25-2.75" over stock. TECH NOTE: 2020-2022 Super Duty diesel models without Tremor package will have front lift height range of 3.25-3.75" over stock. TECH NOTE: 2023 Super Duty diesel models equipped with Tremor package will have front lift height range of 1.5-2" over stock. TECH NOTE: 2023 Super Duty gas models equipped with Tremor package will have front lift height range of 2-2.5" over stock. TECH NOTE: 2023 Super Duty diesel models without Tremor package will have front lift height range of 2.5-3" over stock. TECH NOTE: 2023 Super Duty gas models without Tremor package will have front lift height range of 3-3.5" over stock. APPLICATION NOTE #55: Shocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.. Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with fender trimming and modifications required). APPLICATION NOTE #155: Requires recalibration of Advanced Driver Assistance Systems (ADAS) after install. APPLICATION NOTE #88: Removal of the coil centering cup in factory coil bucket required for installation. Ride height adjustable coilovers provide 2.5-3" or 3.25-3.75" of lift, depending on year model of truck. TECH NOTE: 2005-2019 Super Duty diesel models will have front lift height range of 2.5-3" over stock. APPLICATION NOTE #30: An adjustable track bar is recommended to realign the axle but not required.. ICON 2005+ Ford F-250/F-350 Super Duty 4WD 2.5-3in 2.5 Series Shocks VS RR Bolt-In Conversion Kit. 2005-UP FORD SUPER DUTY 4WD 2.5-3" LIFT 2.5 VS REMOTE RESERVOIR BOLT IN COILOVER CONVERSION KIT. APPLICATION NOTE #120: Secondary shock options available, contact ICON for more details.. Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.00” Backspace / 6mm Offset. Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25” Backspace / 6mm Offset. Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25” Backspace / 6mm Offset. Vehicle-specific shock valving provides unparalleled ride quality and control. 05-23 F250/F350 4WD 2.5-3" 2.5 VS RR BOLT IN CO CONVERSION KIT W/ CAMS. Eibach coil springs guaranteed for life against sagging or breakage. Corrosion resistant CAD plated coilover shock body with 7/8" shaft. FK Rod End bearings for extended longevity and minimal deflection. APPLICATION NOTE #115: Lift heights based on 4WD Crew Cab diesel. Decreased body roll and improved on and off-road ride dynamics. Coilover conversion allows for addition of secondary shock. 05-UP FSD 2.5" 2.5 VS RR BOLT IN CO CONVERSION KIT. Bolt-in system fits in OE coil bucket location. Shocks are fully rebuildable and revalveable. APPLICATION NOTE #1: Only fits 4WD models. FSD 4WD 2.5-3" 2.5 VS RR BOLT IN CO KIT. Factory Wheels & Tires Fitment: Yes. TECH NOTE: Will not fit 2024 models. Coilover Spring and Shock Assembly. FSD COILOVER KIT. COILOVER KIT. 61720

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov