• MADNESS Autoworks
  • MADNESS Autoworks
  • MADNESS Autoworks
  • MADNESS Autoworks
  • MADNESS Autoworks
  • MADNESS Autoworks
  • MADNESS Autoworks
  • MADNESS Autoworks
  • MADNESS Autoworks
  • MADNESS Autoworks

GMC Sierra 1500 6" Basic System w/ Stealth Shocks by Fabtech - 2WD/ 4WD (2014 - 2017) Gen II

Product Information
Price:
Please call us as there are more fitment options available
Manufacturer:
Average Rating:
Not Rated
Fits Models

Please make sure this item fits your vehicle.

In order to reduce errors in orders, please make sure the product you are ordering fits your vehicle model.
Need Assistance?
Assistance Mascot
We're here to help!
Get help from one of our team members!

(562) 981-6800

Product ID Number: 6875
Add this 6" Basic System by Fabtech to your Sierra for an added 6" in height!

Providing an increased height for 35" tall tires, this high quality item also provides additional strength to the front suspension while maintaining factory track width keeping tires under their fenders. Also since the factory track bar is able to retain the same width, the front sway bar is able to utilize its stock position, further increasing ground clearance. The front differential is relocated to eliminate vibration at higher 4 wheel drive speeds.
 
The GEN II Basic System makes lift possible using upper Coilover spacers that provides lift from the top of the shock rather than bottom up meaning for a reduced install time. Rear shocks are Performance Twin Tubes.
 
All brackets and the skid plate are constructed of 1/4” thick steel for proven reliability.

Please call us as there are more fitment and upgrade options available.
  • Ask about more 6" Basic and Performance System Kits. (Gen I, Gen II, Stealth Shocks, Performance Shocks)
  • Shocks can also be upgraded anywhere between Performance, Stealth, and Dirt Logic Resi and Non Resi kits. 
  • Please verify with us what type of Upper Control Arm your vehicle is equipped with and whether you have Magnetic Ride or Standard shocks. 
Tire Fittment w/ stock fenders using this kit:
  • Use 35/1250R17 tires w/ 17x8 wheels w/ 5” BS w/ minor trimming
  • Use 325/65R18 tires w/ 18x9 wheels w/ 5” BS w/ minor trimming
  • Use 35/1250R20 tires w/ 20x9 wheels w/ 5” BS w/ minor trimming
Features:
  • This kit uses Stealth Shocks
  • Provides a 6" lift from stock
  • Fits 2 and 4 WD systems
Shock Absorber Specs:
  • 50mm OD seamless steel body
  • 46mm High flow piston for best ride
  • Vehicle specific valving designed for oversized tires
  • Full floating piston separates gas from oil for a consistent ride
  • 14mm Nitrocarb piston rod resists rock chips and rusting
  • All black finish with raised nameplate as a signature of quality
Notes:
  • Will not fit models with Factory AutoRide shocks.
  • Will not fit all wheel drive models.
  • Cannot use OEM wheel and tire.
  • Does not fit standard cab.
  • Fits models with Factory Forged Black Steel Upper Control Arm.
Located in Chino, California our headquarters spans across five acres. The custom building was constructed to Fabtech's specification for in house development, manufacturing, distribution and administration. The 100,000 square foot facility is divided into designated departments that can operate as a single unit or collectively as a group. This allows Fabtech to function 24 hours a day as needed without compromising security, capacity or quality of the operations.

Fabtech's development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market.

Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.

New vehicle platforms now require a full integration of the vehicles electronics and sensors into the suspension design in order for the vehicle to properly function. Fabtech has invested into proprietary development processes and technologies to aid in properly designing new vehicle suspension systems that lead the industry.

In-field testing and multiple vehicle fit checks ensure products will fit properly during installation and provide years of trouble free service with superior vehicle ride qualities.

To ensure product quality, Fabtech builds all of its componentry in house. The manufacturing division is a world class lean environment dedicated to consistently producing quality parts in low or high volume production runs. Multiple laser cutters, robotic welders, forming equipment, machining centers and skilled welders provide flexibility and quality to its production.

Packaging, warehousing and distribution are contained within the building for immediate shipment world wide. Our Administrative staff provides support to the many divisions that make up the company while our knowledgeable Sales staff assists our valued customers.
Write Review
Shopping Cart
Your cart is empty.

Browse through our many listings
and purchase something today!
Shipping Estimate
ORDERING 3 OR MORE ITEMS?
Call us for a shipping discount!
Phone: (562) 981-6800
Country:
Region / State:
Post Code: