Ford F-150 4" Basic System w/ Rear Stealth Shocks by Fabtech - 4WD (2015 - 2017)

Ford F-150 4" Basic System w/ Rear Stealth Shocks by Fabtech - 4WD (2015 - 2017)

Ford F-150 4" Basic System w/ Rear Stealth Shocks by Fabtech - 4WD (2015 - 2017)
Ford F-150 4" Basic System w/ Rear Stealth Shocks by Fabtech - 4WD (2015 - 2017)
Ford F-150 4" Basic System w/ Rear Stealth Shocks by Fabtech - 4WD (2015 - 2017)
Ford F-150 4" Basic System w/ Rear Stealth Shocks by Fabtech - 4WD (2015 - 2017)
Ford F-150 4" Basic System w/ Rear Stealth Shocks by Fabtech - 4WD (2015 - 2017)
Ford F-150 4" Basic System w/ Rear Stealth Shocks by Fabtech - 4WD (2015 - 2017)
Ford F-150 4" Basic System w/ Rear Stealth Shocks by Fabtech - 4WD (2015 - 2017)
Product Information

Inquire for Price

Lowest Price Guaranteed
Average Rating
Brand:
Model:
F 150

Available Options

Drive now, Pay later with Affirm
or with PayPal

Both options will be available upon checkout.

Add this 4" Basic Lift System with Rear Stealth Shocks to your Ford F150 by Fabtech!

Fabtech’s new 4” F150 system allows the use of 35” tall tires and feature high arched lower control arm cross members constructed of 1/4 “ thick steel for maximum strength. The Fabtech iron steering knuckles retain the stock track width allowing the tires to stay fitted under the fender for a clean finished look. The rear lift is accomplished with a block and u bolt configuration.
 
The Basic System includes heavy duty front Coilover shocks for increased dampening capacity while retaining the factory coil springs. Rear shocks include Fabtech’s Performance or Stealth shocks.

Fitment w/ Stock Fenders
  • Use 35/12.50R18 tires w/ 18x9 wheels w/ 5" BS w/ minor trimming
  • Use 295/70R18 tires w/ 18x9 wheels w/ 5" BS w/ minor trimming
  • Use 35/12.50R20 tires w/ 20x9 wheels w/ 5" BS w/ minor trimming
  • Use 296/60R20 tires w/ 20x9 wheels w/ 5” BS w/ minor trimming
Notes:
  • Can not use OEM wheel and tire.
  • Does not fit Standard Cab.
  • Will not fit Raptor models.
  • Requires cutting of fenderwell sheetmetal for use with 35” tires.
Shock Specs: Stealth
  • 50mm OD seamless steel body
  • 46mm High flow piston for best ride
  • Vehicle specific valving designed for oversized tires
  • Full floating piston separates gas from oil for a consistent ride
  • 14mm Nitrocarb piston rod resists rock chips and rusting
  • All black finish with raised nameplate as a signature of quality
​​​​Notes:
  • Can not use OEM wheel and tire.
  • Does not fit Standard Cab.
  • Will not fit Raptor models.
  • Requires cutting of fenderwell sheetmetal for use with 35” tires.



CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

About Manufacturer

Located in Chino, California our headquarters spans across five acres. The custom building was constructed to Fabtech's specification for in house development, manufacturing, distribution and administration. The 100,000 square foot facility is divided into designated departments that can operate as a single unit or collectively as a group. This allows Fabtech to function 24 hours a day as needed without compromising security, capacity or quality of the operations.

Fabtech's development capabilities are second to none with over 20 years of experience in aftermarket suspension design. State of the art software, fabrication equipment along with our seasoned engineers and fabricators allow the company to develop products that are constantly on the cutting edge. Fabtech has received numerous awards for our designs that continue to lead the market.

Proper design in suspension development is key in providing a quality, trouble free product to the end consumer. Fabtech leads the industry with extensive research, design technology and rigorous testing that results in the highest performing, finest quality suspension system for the discerning offroad enthusiast.

New vehicle platforms now require a full integration of the vehicles electronics and sensors into the suspension design in order for the vehicle to properly function. Fabtech has invested into proprietary development processes and technologies to aid in properly designing new vehicle suspension systems that lead the industry.

In-field testing and multiple vehicle fit checks ensure products will fit properly during installation and provide years of trouble free service with superior vehicle ride qualities.

To ensure product quality, Fabtech builds all of its componentry in house. The manufacturing division is a world class lean environment dedicated to consistently producing quality parts in low or high volume production runs. Multiple laser cutters, robotic welders, forming equipment, machining centers and skilled welders provide flexibility and quality to its production.

Packaging, warehousing and distribution are contained within the building for immediate shipment world wide. Our Administrative staff provides support to the many divisions that make up the company while our knowledgeable Sales staff assists our valued customers.

Product Reviews

Average user rating

0 / 5

0 reviews

5
4
3
2
1

Two locations to serve you

AUSTIN, TX

22108 SH 71 W.
Spicewood, TX 78669
512-982-9393
Mon-Fri: 9 AM - 6PM CST
Sat-Sun: Closed

LOS ANGELES, CA

2716 Dawson Ave.
Signal Hill, CA 90755
562-981-6800
Mon-Fri: 9 AM - 6PM PST
Sat-Sun: Closed