ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. If you are looking for a more user defined tune, consider looking into the Compression Damping Control Valve (CDCV) shocks.. ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity.. ICON 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune.. APPLICATION NOTE #253: Distance to bump stops must be reduced by at least 2" to prevent damage to shocks/shock mounts. This can be accomplished with lift blocks or bump stop spacers.. All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON’s Compression Damping Control Valve (CDCV). One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road. ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression. One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish. Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range. Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use. PTFE lined spherical bearings and application specific mounting hardware. APPLICATION NOTE #185: Will not fit 2WD Tacoma with 5 wheel lug studs. ICON 2005+ Toyota Tacoma 6in Rear 2.5 Series Shocks VS RR - Pair. 2005-UP TACOMA 6" LIFT REAR 2.5 VS REMOTE RESERVOIR SHOCK PAIR. 7/8” diameter induction hardened, chrome plated shock shafts. Nitrogen charged monotube design with piggyback reservoir. TECH NOTE: Compatible with 2-4" of rear lift over stock. 6061 aircraft grade aluminum CNC machined components. 05-UP TACOMA 6" REAR 2.5 VS RR PAIR. 05-23 TACOMA 6" REAR 2.5 VS RR PAIR. Suspension Shock Absorber Set. 05-UP TACOMA 6" REAR 2.5 RR. REAR SHOCK ABSORBERS. SHOCK ABSORBER PAIR. 100% Rebuildable. 100% Revalveable. 57806P

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov